R3 – DOMESTIC ROTARY SWING GATE MOTOR
The R3 rotary arm swing gate motor remains the logical choice for applications where the gate pillar is very wide and will not accommodate a linear drive system. It can handle domestic gates up to 3.5m wide per leaf weighing no more than 150kg. The R3 also offers battery backup. The electronic controller and power supply are mounted in the MASTER motor giving the option to wall-mount the operators, resulting in an installation that is greatly simplified. As with all CENTURION gate controllers, the R3 offers a wide range of useful features. As with the sliding gate range of operators, this battery-driven swing gate motor can also be adapted to operate off a solar power supply. The smooth operator for swing gates.
MAIN FEATURES:
-
Battery backup.
-
Full position control.
-
Safe anti-crushing protection.
-
Fast, smooth and quiet operation.
-
Multiple programmable features.
-
Master motor with integrated controller and charger.
-
Be alerted of gate activity via SMS by connecting a CENTURION GSM device.
R3 TECHNICAL DATA:
| DESCRIPTION | |
|---|---|
| Input Voltage | 220 - 240V AC +/- 10%, 50Hz [*] |
| Motor Voltage | 12V DC |
| Motor Power Supply | Battery-driven [**] - 800mA Charger |
| Operator Output Torque - Max | 95Nm |
| Typical Gate Opening Time | <14 sec |
| Duty Cycle - Main Present | 25% [***] |
| Daily Operations - Max | 150 [****] |
| Maximum Leaf Width for Corresponding Gate Mass [****] | 2m - 35kg 3.5m - 150kg |
[*] – Can operate off a solar supply, consult Centurion Systems for assistance. [**] – 7Ah battery (can be upgraded for longer power failure autonomy). [***] – Based on 25°c ambient temperature and unit not in direct sunlight. [****] – Assumes a 90 degree opening gate and pedestal mount.
R5 – DOMESTIC & LIGHT-INDUSTRIAL ROTARY SWING GATE MOTOR
The smooth operator for swing gates. The CENTURION R5 rotary swing gate motor is well-suited for higher volume sites such as entrances to housing estates and business parks. It can handle gates up to 3.5m wide per leaf weighing up to 250kg. The R5 also offers battery backup and with the electronic controller and power supply mounted in the Master motor and with the option to wall-mount the operator, installation is greatly simplified. As with the sliding gate range of operators, these battery-driven swing gate units can also be adapted to operate off a solar power supply.
MAIN FEATURES:
- Battery backup.
- Full position control.
- Safe anti-crushing protection.
- Fast, smooth and quiet operation.
- Multiple programmable features.
- Master motor with integrated controller and charger.
- Be alerted of gate activity via SMS by connecting a CENTURION GSM device.
R5 TECHNICAL DATA:
| DESCRIPTION | |
|---|---|
| Input Voltage | 220 - 240V AC +/- 10%, 50Hz [*] |
| Motor Voltage | 12V DC |
| Motor Power Supply | Battery-driven [**] - 2A Charger |
| Operator Output Torque - Max | 250Nm |
| Typical Gate Opening Time | < 17 sec |
| Duty Cycle - Mains Present | 50% [***] |
| Daily Operations - Max | 250 [****] |
| Maximum Leaf Width for Corresponding Gate Mass [****] | 2m - 600kg 3.5 - 260kg |
[*] – Can operate off a solar supply, consult Centurion Systems for assistance. [**] – 7Ah battery (can be upgraded for longer power failure autonomy). [***] – Based on 25°c ambient temperature and unit not in direct sunlight. [****] – Assumes a 90 degree opening gate and pedestal mount.
Gate Motors
| 
| | 
| 
| 
| 
| 
| 
| 
|