D20 SMΔRT+
Metres per Minute
Max Gate Weight (Kg)
Life Cycle
Remotes Storage
D20 SMΔRT+ Sliding Gate Operator: Heavy-Duty Performance
The D20 SMΔRT+ is the heavy-duty industrial sliding gate operator in the SMΔRT+ range, engineered for high-demand commercial and industrial entrances where reliability, durability and consistent uptime are critical.
Application: Heavy Industrial/Commercial
What Sets the D20 SMΔRT+ Apart?
Industrial torque for heavy-duty applications
Rated for sliding gates up to 2 000 kg and 25 m in length, providing the drive capacity required for large-scale industrial installations.
Designed for high-cycle environments
Capable of up to 750 operations per day, making it well suited to high-traffic commercial and industrial entrances with constant vehicle flow.
Enhanced battery performance
Powered by a robust 24 V battery-driven system to maintain operational continuity during mains power interruptions.
Expanded accessory integration flexibility
Equipped with six configurable inputs/outputs — four low-current and two high-current — allowing seamless integration of higher-draw devices such as the SMΔRT Siren and GLX900.
Remote support
Built-in always-on cloud connectivity speeds up fault finding and cuts unnecessary trips to site
Pre-dispatch clarity
Confirm the likely fault and parts before travelling to site, helping create visibility of the situation beforehand
Revolutionising the Installer Experience
Get MyCentsys PRO App
Simplify installations, enhance efficiency, and stay in control with the MyCentsys Pro app—your go-to tool for effortless configuration, diagnostics, and system management.
Become a Trusted Professional
With specialised, in depth training in servicing, maintaining, installing and repairs of all SMΔRT Centurion Systems Motors.
| Technical Specifications | D20 SMΔRT+ | |
|---|---|---|
| Input voltage | 110V - 240V AC 50/60Hz1 | |
| Current consumption (Mains) | 590mA | |
| Battery charger current output | 1.8A @ 27.6V +/- 5% (52W) | |
| Maximum number of operations per day | 750.2, 5 | |
| Duty cycle - Mains present2, 3 | 45% | |
| Motor voltage | 24V DC | |
| Motor power supply | Battery-driven (Standard Capacity - 2x12V5 7Ah)3 | |
| Current consumption (motor at rated load) | 9A | |
| Input / Output sink currents (Max accessory current draw) | ||
| I/O 1-4 | 100mA (24V) | |
| I/O 5 and 6 | 3A (24V) 10sec Pulse | |
| Motor push force - starting | 52kgf | |
| Motor push force - rated | 39kgf | |
| Gate mass - maximum | 2000kg | |
| Gate length - maximum | 50m | |
| Gate speed (varies with load)2, 5 | Max: Up to 18m/min Rated: Up to 16m/min |
|
| Manual Override | Lockable lever with key release | |
| Drive Pinion | 13T Module 4 | |
| Operations in standby with 2x 7.2Ah batteries | Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) | |
| Half day2, 3, 4 | 101 | 55 | |
| Full day2, 3, 4 | 80 | 45 | |
| Collision Sensing | Electronic | |
| Operating temperature range | -15°C to +50°C | |
| Onboard receiver type | CENTURION rolling code (Keeloq encryption) multichannel | |
| Receiver code storage capacity | 1500 Remotes6 | |
| Receiver frequency | 433.92MHz | |
| Degree of protection | IP54 | |
| Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | |
| Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used